Osborne 1 Computer Restoration Part 2 The 8-Bit Guy English Spanish

Osborne 1 Computer Restoration Part 2YouTube↗ IA↗(long shot)
Education 1M views 21.9K likes 391 dislikes 13 Jul 2017 Show Contributors 5

The 8-Bit Guy 1.5M subscribers United States YouTube↗

Contributed subtitles

Russian Madel Laboratories

Turkish UCyENlC_4ZzqYjf2gh5iQmog

German Gustav Gurke

Italian lupo master

Polish Józefik 12

Click to Play Video

In the last episode, I started restoring this old Osborne 1 computer, and I managed to finish

And although it looked better, the keys came out sort of marbled looking.

In this episode, I’ll be tacking the rest of the computer.

So let’s get right to it.

The first thing you need to do to disassemble an Osborne is to remove these knobs for the

brightness and contrast.

Then you can remove the screws holding the face of the computer on.

And it just pulls out like this.

Mine has a composite video option, I’m not sure if that is standard or not, but anyway

it has to be unplugged.

Anyway, then the rest of the face just comes off.

Next you need to turn the unit upside down and there are 5 screws to remove.

And believe it or not, that’s all you have to do take the case off.

These pieces in the back just slide out.

There’s a little ground wire here that needs to be unplugged.

And this entire handle piece just comes right out.

Notice that around the edge you can see the original color of the Osborne where it has

not been exposed to UV light.

With any luck I can get the rest of the case to look like that.

I’ll need to remove this ribbon cable for the floppy drives.

Although this looks really similar to ribbon cables on PC floppy drives of the era, this

cable actually provides power as well as data.

The logic board itself is just held in by 4 screws.

Just need to unplug power and the video cable.

OK, so once the logic board is out, I can remove the rest of the case.

There wasn’t anything holding it on, it was just sitting in there, but I didn’t

feel comfortable having the computer sit on top of the logic board, so that’s why I

took it out first.

Taking a look at this board, you may notice this large daughter board, this is actually

an aftermarket product that gives the Osborne 80 column video.

The other small daughter board you see there is another add on, although this one is from

Osborne itself and it’s a double-density floppy controller.

You see, the early models could only use single density disks.

I’m sorry I didn’t get a better photo of that, I had meant to get a better shot

and never got around to it.

I’ll just de-route this floppy ribbon cable and remove it.

And now I’ll give you the first look at this tiny little CRT.

It’s quite long compared to it’s viewing area.

The next thing I needed to do was remove these floppy drives.

Normally, if you were just wanting to retrobrite the case or something, you could just leave

But, one of these drives is not working and so I need to remove it and have a look.

And here’s what these things look like from the underside.

The belts are still good on both of the drives.

Now I’m going to unplug this power supply.

This is the last component that I will be removing.

It’s just held onto the case by 4 screws.

And there it is.

I’ll just cut this zip-tie here and it will be free.

These mains power lines look like they are soldered in, but they aren’t.

If you pull, like this, they’ll pop loose.

Ok, so the power supply is finally completely removed.

So let’s have a look at it.

See this capacitor here?

This is the one that blew up and filled my house with a horrible smelling smoke.

I had to open the windows and turn all of the fans on to get the smell out of my house.

Apparently this is a common failure on this, in fact a friend of mine had warned me not

to even use the computer until I removed that capacitor.

I didn’t take his advice and, well, sure enough, after about 10 minutes of using the

computer, it blew up.

So I’m going to go ahead and remove it now.

The interesting thing, and I suppose it is good news, about this capacitor is that it

isn’t really needed.

It’s a line-filter capacitor that filters the A/C power going into the Osborne.

It’s like your appendix in that if it is giving problems, it’s best to just remove

Some soldering wick made quick work of this, and the capacitor came out very easily.

And here’s what it looks like.

It apparently blew up from both sides.

OK, next on my agenda is to clean the CRT.

It’s hard to tell on camera, but it’s pretty dirty.

And the trouble is, there is this plastic cover that sort of hovers right in front of

the CRT with an air gap, so dust and stuff can accumulate between the two over a long

period of time.

It’s just held on by double-sided tape.

I just removed the tape and then followed up with some alcohol to get the sticky goo

And that seemed to work pretty well.

I was finally able to clean the CRT, probably for the first time ever since this computer

And now you can see this little cover and even still it is hard to see on camera but

this thing is filthy.

So I’ll give it a good cleaning with windex too.

OK, so I had some double-sided tape in the house already, but I noticed it was only half

as thick as the stuff they used.

So I just took two pieces and stuck them together, and I think that will work just fine as it

almost perfectly matches the thickness of the original.

I had to be very careful placing the cover back on because I would likely only get one

shot at this to get it lined up correctly.

This sort of tape isn’t very forgiving if you want to pull it back off.

And there we have it.

I think that will make the video image much cleaner now.

Next, I wanted to turn my attention to these floppy drives.

They have these little metal covers on them, which I thought I should remove to have a

And it looks like I accidentally left the word star disk in this one.

So there were two problems I had to deal with here.

One was the drive motor itself.

It was seized up and wouldn’t spin.

But once I managed to rotate it a few times with my fingers it broke free and now it seems

And the other problem, believe it or not, was the head mechanism here was seized up

on these rails and wouldn’t move.

Again, after I broke it free it will now move, but it’s still very stiff.

So what I’m going to do is use some of this lithium grease and I’m just going to put

some of it on these rails here in all 4 places where it makes contact.

And it doesn’t need much.

A little goes a long way.

Then I’ll just need to move the head back and forth a few times.

And, I can immediately tell after the 3rd or 4th time I moved it that the amount of

friction has been greatly reduced.

Yeah, now it’s moving a lot more easily.

I did this to both drives, and also lubed up every other part I could see that might

OK, so next I wanted to turn my attention to this yucky power panel.

I needed to remove the plastic bezel and there appeared to be just two screws.

However, I realized there were two more under this old crusty sticker.

And since I don’t even know what the purpose of this sticker is, I decided just to remove

All right, so with the two parts separated it will be much easier to clean.

My first goal should be to get rid of the rest of this sticker, but some of it is holding

on for dear life, so I’ll spray some WD-40 on there and let it sit for a few minutes.

That helped a lot as I was able to easily peel the rest of the large pieces up with

After that I could just rinse the whole thing off in the sink and use a scrub brush to get

some of the more stubborn gunk.

And just drying it off now, I can already tell it looks 100 times better.

So yeah, and there we go.

Sure, it needs some retobrite, but it looks much better already.

This metal piece here was gross too, so I just sprayed it down with some windex and

it cleaned right up.

And here’s this piece, all finished up.

Next I’m going to take a look at these two smaller pieces.

This is the carry handle for the computer, and this piece here is the power port cover.

It’s really too bad I can’t unscrew this handle from the plastic, it appears to be

riveted in place.

So the first thing I’ll do is just clean it up as much as possible.

And it already looks tons better.

The little metal covers are also all rusted up.

Believe it or not I scrubbed this one here with just alcohol and managed to clean it

up quite a bit.

You can see how it looks compared to the other one, which I haven’t started on yet.

I actually came back and followed that up with some baking soda and worked it over with

a tooth brush for several minutes.

And we’re about to find out how effective that was.

You know, it’s not bad, actually.

It doesn’t look new, but it looks much better.

Moving on, it’s time to tackle the main case.

I started with using the hose outside as it was the quickest way to get most of the dust

I followed that up with my usual windex and alcohol routine.

But I wanted to show you some of the pieces had black spots like this that refused to

A lot of people always tell me to use a magic eraser for those.

But I prefer to use baking soda.

I’ve just found that usually it is easier to work with, even though it does leave a

Plus it’s cheap and available almost anywhere.

And, as you can see, it worked pretty darned well on this.

I had the same issue with the main case as well, as you can see I tackled it with some

alcohol, but still ended up with lots of little scuff spots.

So I ended up using baking soda on pretty much the whole case.

This took a good 20 minutes to do, but the results were very good, as you can see here.

OK, so here are all of the parts that are going to require retrobriting.

Now, I have a few things to say about the retrobrite process.

I have had hundreds of emails telling me supposedly better ways to do it.

I’ve been wanting to try some of these, but at the same time I feel some of the suggestions

are risky and I don’t want to try them on something I care about.

I’d rather use a technique that is tried and true, at least for me.

So I’m going to be doing this my usual way.

Granted, my keys turned out marbled looking using this technique, but the keyboard case

itself was fine.

And since these are all the same type of plastic, it should be fine as well.

The first part to finish was the power panel.

It had the least amount of yellowing, so that isn’t surprising.

After rising it off, I went ahead and mounted it back to the metal parts.

So, at this point in the project, everything was going pretty well.

I mean, I’d managed to clean the screen, removed that blown capacitor, I even got both

of the floppy drives working, and I even managed to shine up those little metal pieces.

So, I mean, things were working great!

Unfortunately, this is kind of the point in the project where things went downhill.

The first problem I noticed when checking up on my retrobrite was that the leather handle

seemed to be coming apart.

So I thought I’d better end the treatment on this part early and rinse it off and have

So, this is not done retrobriting, even though you can tell it looks better.

But I wanted to get a look at this leather.

It appears ripped in places.

I started to wonder if it was like that before and maybe the retorting just made the material

underneath a brighter color so that now it shows through, but I went back and examined

some earlier footage and you can see that is definitely not the case.

So the peroxide was definitely damaging the leather here.

So, in theory I could get some new leather and re-cover the handle with it and stitch

it all together, but I don’t really know how to do that very well.

I’m going to look around and see if maybe I can find somebody who can do that for me.

I don’t think it should be too difficult for someone who’s experienced in working

with leather, so that’s something that can be fixed.

And, by the way, when I show mistakes like this it’s so that you guys won’t make

the same mistakes, so another lesson learned!

So the case had been out in the sun for about 4 hours, and I thought it was time to rinse

it off and have a look.

So, even though these pieces are like 90% complete, you can see they are suffering from

the streaking effect, the main case had some too.

Several people had been suggesting to me to stop using the plastic wrap and just apply

the cream directly to the surface.

Now, keep in mind the entire purpose of the plastic wrap is to keep the peroxide from

So with this method, I would have to come out every 5 to 10 minutes and apply fresh

cream and spread it all around with the paint brush.

So, essentially you are making a trade off between how much time you spend working on

it, and the end result.

I could tell that after just 30 minutes, this stuff was becoming very thick, even though

I had already added fresh cream several times.

Oh, and it left a bunch of cream on my driveway that I had to rinse off.

And here’s the result.

Yeah, it looks terrible.

In fact, it actually looks worse than it did after my first treatment using the plastic

And here’s one of the smaller pieces.

So, it’s no secret that the best way to do retrobriting, at least of all of the methods

currently known, is total submersion in hydrogen peroxide.

The problem is with the larger items, you need a really big container and quite a bit

of hydrogen peroxide.

So it isn’t really feasible.

But I thought I’d test these smaller pieces and see if I could fix the damage.

The bag started leaking, so I eventually switched to this little container.

After a few hours in the sun, I rinsed it off and you can see this piece definitely

I also did this other little piece and it looks better to, not perfect, but better.

So I think that proves that it is possible to reverse some of the streaks in the future

when I develop a better method for handling these larger pieces.

But for the time being, I decided to go ahead and re-assemble the computer.

I don’t have any more time to mess with these case pieces right now, but it is something

I plan to revisit in a few months.

On the bright side, this computer is very easy to take apart, at least as far as the

case pieces are concerned.

So there’s definitely no harm in re-assembling it.

And so here’s the final result.

Some parts of the computer look almost brand new.

While other parts look streaked.

But at least the computer is clean now and doesn’t make me cringe to use it.

This part here actually looks really nice.

And so does this rear power port area.

I’ll go ahead and power it on, and you can see the screen is nice and sharp.

So, I wanted to take a moment to talk about what actually causes the streaking, whether

you’re using the plastic wrap or not.

Imagine a cross-section of the retrobriting process.

Here’s your yellowed plastic, and here’s your plastic wrap.

And ideally you’d have a perfect layer of cream in here.

Well, it doesn’t really work out that way.

In fact, it’s more like this.

And these raised areas have more peroxide so it will react more with the plastic making

These lower areas have less peroxide so it will become spent faster, leaving dark spots.

If you forgo the plastic wrap, you get a similar problem.

Let me demonstrate with this mustard.

Now, imagine after a while it has already reacted with the plastic and I’ll represent

the spent chemical with this ketchup.

Now, I can come back and add in more fresh peroxide and mix it up, but you will see streaks

between the old and the new.

The trouble is with the peroxide, both the old and new look exactly the same to the eye

so it’s hard to make sure it is mixed up properly.

Well, what was supposed to be a single video ended up turning into a two parter.

And now, it’s going to turn into a three parter because, again, this is taking longer

than anticipated and I really wanted to spend some time showing you what you can do with

an Osborne and talking a little about CP/M and the history of these machines and whatnot,

and so I’ve decided to split that off into a 3rd episode.

And no, it’s not some episode far into the future that I might make, I’m actually working

on it right now.

So, just stick around a few days for that and thanks for watching!

Similar videos:

Osborne 1 Computer Restoration Part 1
The 8-Bit Guy
1.4M views 24.8K likes 542 dislikes 08 Jul 2017100% match

Restoring the Macintosh Plus to working order!
The 8-Bit Guy
1.1M views 24.5K likes 296 dislikes 23 Feb 201738% match

Bell and Howell (Apple II+) Restoration
The 8-Bit Guy
1.4M views 32.6K likes 597 dislikes 19 Nov 201837% match

Schlupflider Stripes Erfahrung ► Schlupflider tapen
Barbara Formann
3.7K views 239 likes 17 dislikes 30 Aug 202035% match

Commodore 128 Complete Restoration and Board Repair.
The 8-Bit Guy
2M views 37.4K likes 733 dislikes 01 Feb 201735% match

Aquarium vom Sperrmüll neu verkleben | Reseal of an aquarium from trash
Goldene Aquariumzeiten
14.4K views 214 likes 12 dislikes 03 Jan 201934% match

Macintosh SE Restoration and SD-2-SCSI upgrade
The 8-Bit Guy
2.1M views 34.6K likes 727 dislikes 04 Feb 201734% match

Rodney Mullen: Pop an ollie and innovate!
TED
2.2M views 62.4K likes 748 dislikes 02 Feb 201533% match

Compaq Portable 1 Restoration - Part 1
The 8-Bit Guy
1.1M views 25.6K likes 363 dislikes 04 Sep 201833% match

Modding a consumer TV to use RGB input
The 8-Bit Guy
1.5M views 42.1K likes 652 dislikes 13 Oct 201833% match

Alte Nähmaschine retten – Reinigung und Pflege am Beispiel einer Gritzner VZ | 1080p | EN Subtitle
sewing machine directory
1.1K views 23 likes 0 dislikes 07 Jan 202133% match

Five Nights at Freddy's: Sister Location - Golden Freddy Mode
Markiplier
13.2M views 309.9K likes 2.9K dislikes 22 Dec 201633% match

DIY Wood Burning Technique -Using Wood Dyes
Build Dad Build
706.2K views 11.5K likes -1 dislikes 14 Nov 201933% match

LEVELLA | Golf 2 1.8T Projekt #9 | Die Karosserie ist fertig! | Sven's BMW E30 328i
Levella
60.5K views 1.5K likes 32 dislikes 12 Apr 202033% match

🔝TOP 5 Perfumes florales cítricos frutales para VERANO que ME ENCANTAN 😍 |Smarties Reviews
Smarties Reviews
9.1K views 558 likes 17 dislikes 09 Aug 202032% match

What is Rick Lax doing?
Drew Gooden
5.1M views 252.9K likes -1 dislikes 03 Mar 202032% match

Deep Cleaning a Girl’s DIRTY TRUCK | Nasty Carpet Cleaning and Satisfying Car Detailing!
Stauffer Garage
899.1K views 15.9K likes -1 dislikes 28 Dec 201932% match

MEINE TOP 8 TOM FORD FAVORITEN PARFUMS 2020 | Fragrance Dawg
Fragrance Dawg
2.5K views 98 likes 4 dislikes 31 Oct 202032% match

Offline vs. Online Dating - Was funktioniert besser? I Das Selbstexperiment
tomatolix
1.1M views 38.3K likes 1.1K dislikes 23 Oct 201732% match

Challenge: Geld verdienen mit psychologischen Studien
$AFE
169.9K views 6.5K likes 79 dislikes 18 Nov 202032% match

"Fk Irons Spektra Flux" Review/Test/Bericht/Unboxing (German/English Subtitles)

1.6K views 30 likes 0 dislikes 10 Jul 202032% match

Binge-Eating-Störung - Wenn Essen krank macht: Wie man die Fressattacken in den Griff bekommt
Y-Kollektiv
1.5M views 18.3K likes -1 dislikes 28 Mar 201932% match

TRS-80 Color Computer 1 Restoration
The 8-Bit Guy
1.2M views 25.4K likes 337 dislikes 26 May 201732% match

Freediving im wunderschönen Amed - Wie tief schaffen wir es ohne Sauerstoff?! l Liberty Wrack
What's NEXT ?!
4.8K views 277 likes 2 dislikes 27 Sep 202032% match

OnlyFans: Nackt im Netz und Feministin?
Y-Kollektiv
1.2M views 19.4K likes -1 dislikes 17 Sep 202031% match

Klopp about Klopp: Life is my preparation! | Interview
DW Kick off!
1.2M views 15.2K likes -1 dislikes 30 Apr 201931% match

How to Make Patterned Plane Shaving Veneers - Yosegi
Pask Makes
813.7K views 11.7K likes -1 dislikes 14 Nov 202031% match

Biss auf Biss am Bach | Forellenangeln mit Gummifisch & Spoon + Fail
Megatock
8.2K views 166 likes 8 dislikes 06 Apr 202031% match

How to make these Alternative Dovetail Joints (The Knapp Joint)
Pask Makes
2.7M views 41.7K likes -1 dislikes 08 Oct 201931% match

A Lost Cause | RM250 Rebuild 16
Cameron Niemela
45.9K views 2.5K likes 21 dislikes 25 Nov 202031% match

Settings Privacy About Contact Donate