Building My CR250 Engine! Cameron Niemela English Chinese (China)

Building My CR250 Engine!YouTube↗ IA↗(long shot)
Autos & Vehicles 539.3K views 8.1K likes 241 dislikes 09 Sep 2018

Cameron Niemela 406K subscribers United States YouTube↗

Click to Play Video

well guys it is finally time to bolt up

好吧，伙计，终于有时间了 cr250气缸到达底端

the cr250 cylinder on to the bottom end

now I've been waiting forever to do this

现在我一直在等待这件事所以让我们直接进入它，但让我

so let's jump right into it but let me

say you're gonna want to stick around

说你会想要坚持下去对于整个视频，因为最后

for the entire video because at the end

I've got a great opportunity for you

我有一个很好的机会伙计们好吧，让我们开始吧

guys alright let's get started so the

cylinder is all ready to go got the

气缸已准备就绪了所有组装的排气阀都是这样的

exhaust valve all assembled and this was

a cylinder that was repaired by power

一个由电力修复的气缸钢铁早先有一个很大的凿子

steel there's a big gouge in earlier so

I had to fix that replayed it and weld

我不得不修复重播它并焊接排气桥也是如此

the exhaust bridge as well so bores

看起来很棒这件事已经准备好了

and this thing is ready to be bolted

onto the bottom end and the piston I'll

到底端和活塞我会用于此构建是一个库存大小

be using for this build is a stock size

vertex take a look at what we got here

顶点看看我们在这里得到了什么在盒子里面，我有戒指

inside the box I've got the Rings this

is a dual ring piston about the circlips

是一个围绕弹性挡圈的双环活塞现在，针头还带有一个活塞

as well now the needle bearing a piston

pender right here so piston looks great

在这里，所以活塞看起来很棒我准备好了

I'm gonna get it ready to slide on the

rod by installing the piston rings and

通过安装活塞环和杆其中一个活塞销或夹子就像你一样

one of the piston pins or clips as you

can see this is a dual ring piston so

可以看出这是一个双环活塞所以我将首先安装底环

I'll be installing the bottom ring first

followed with the top and the Rings look

接着是顶部和戒指的样子就像他们从上到下一样

like they're identical from top to

bottom and they're marked right here

底部，他们在这里标记有发球台，所以任何标记应该是

with a tee so any markings should be

facing up and on 2-stroke pistons they

面朝上和两冲程活塞他们让它变得非常简单就是一个别针

make it pretty simple there's a pin

where the ring and gap lines up actually

实际上环和间隙排成一行的地方在我将环滑到活塞上之前

before I slide the rings onto the piston

I'm gonna set the ring end gap here with

我要在这里设置环端间隙圆筒所以这是如何工作的我是

the cylinder so how this works is I'm

gonna slide the Rings into the bore and

将戒指滑入钻孔和测量环上的端部间隙

measure the end gap here on the ring so

according to the vertex instructions on

根据顶点说明一个二冲程发动机应该有一个

a two-stroke engines there should be a

minimum ring end gap of six to nine

最小环端间隙为6到9 每英寸孔的千分之一，所以孔

thousandths per inch of bore so the bore

on this cylinder is C two point six

在这个圆柱上是C两点六英寸，所以我会去点

inches so I'm gonna gonna go to point

six times the spec right here and after

这里和之后规格的六倍一点点数学最小环

a little bit of math the minimum ring

end gap should be sixteen to twenty

结束差距应该是十六到二十现在我已经三千七百英寸了

three thousand seven inch so now I'm

just gonna compress the ring with my

只是用我的压缩环手指

and slide it into the bore here

并将其滑入孔中

I'm just gonna work it down inside the

我只是要把它放在里面圆柱体有点大约半英寸

cylinder a little bit about half an inch

down it's gonna make sure it's even all

它会确保它甚至全部顺便说一下，我得到了一个

the way around that way I'm getting an

accurate measurement looks pretty good

准确的测量看起来很不错所以现在我要衡量这一点

so now I'm going to measure this little

gap here at the end of the Rings with a

与戒指结尾的差距在这里一套塞尺和再一次我们的

set of feeler gauges and once again our

spec was from 16 to 23 thousandths so

规格从16到23千分之一我会在这里找到第十六名

I'm gonna find a sixteenth out here

right there and see if that fits into

就在那里，看看是否适合差距是的，所以非常适合那里

the gap yep so that fits in there pretty

good but there's still a little bit of

好，但仍有一点点运动，所以我会碰到它

movement so I'm gonna bump up on the

feeler gauge size and find out what the

塞尺尺寸，找出什么让我们走吧

actual measurement there is let's go

ahead and try 20,000 there there's a

提前尝试20,000，那里有一个有点拖累或它正在赶上

little bit of drag or it's catching on

the ring so that is the gap right there

这个戒指正好在那里所以这绝对属于

so that definitely falls within the

sixteen to twenty three thousand two

十六至二万三千两我们早些时候曾经只是一个

that we had earlier and just to be a

hundred percent sure I'm gonna go ahead

百分百肯定我会继续前进并将另一个活塞环测量为

and measure the other piston ring as

so this ring has the same exact

所以这个戒指具有相同的精确度测量所以我们很高兴

measurement so we're good to go

next up is gonna be putting the rings on

接下来会打开戒指实际上，活塞可以

to the piston all right let's actually

start assembling stuff except it's just

开始组装东西，除了它只是谈论它所以我会润滑

talking about it so I'm gonna lube up

the piston here with some maxima

这里的活塞有一些最大值装配润滑剂这只会有所帮助

assembly lube this is just gonna help

slide the Rings into place just a light

将戒指滑入灯光处在这里穿

on the top of the piston will do so like

在活塞的顶部会这样做我之前说过这两个戒指是

I said earlier these two rings are

identical and there's a t mark on the

相同，并且有标记他们的顶部，以便T应该面对

top of them so that T should be facing

up so I'm just gonna locate the ring end

所以我只是要找到戒指的一端这里的间隙销位于底部凹槽上

gap pin here on the bottom groove it's

right there so I'm going to line up the

就在那里，所以我要排队了与环的末端间隙扩大了它

end gap with the ring expand it and

slide it over the piston

将其滑过活塞

and then for the top ring it's gonna do

然后对于顶环来说它会做的同样的事情排列在最后的差距与

the same thing line up the end gap with

a pin spam the ring over the piston

活塞上的戒指是垃圾邮件

so right now it looks like the rings are

所以现在它看起来像戒指活塞上的超级松散就像他们一样

super loose on the piston like they're

almost too big or something but once I

差不多太大了，但有一次我压缩它们并将它们滑入

compress them and slide them into the

cylinder they'll be fine

圆筒他们会好的然后在这里做的最后一件事是

and then the last thing to do here is to

install one of the piston pincer clips

安装一个活塞夹钳所以我喜欢做的是有一点

so what I like to do is there's a little

cutout here in the piston so I'm gonna

活塞在这里切开，所以我要去用弹簧挡住一端

line one end of circlip up with that

cutout should be able to push that

切口应该能够推动它弹性挡圈直接放在活塞内部

circlip right down inside the piston and

sometimes it helps to have a little flat

有时它有点平坦有帮助刀片螺丝刀推动弹性挡圈

blade screwdriver to push that circlip

down into the piston so the circlip went

因为弹簧夹进入了活塞只是活塞内部有点深

a little bit deep inside the piston just

gonna push it through into the groove

要把它推进凹槽从另一边，我们去了它

from the other side there we go it's in

there and looking good and sometimes

在那里，看起来很好，有时候当你安装弹性挡圈时

when you're installing the circlips the

end of a circle it can scratch up the

它可以划掉一个圆圈的一端活塞在这里就像一个轻微的小

piston here just like a light little

little burr there so what I'm gonna do

那里有小毛刺，所以我要去做什么是一个文件，轻轻地光滑

is take a file and lightly just smooth

that out nothing major but definitely

那绝对不是什么重要的事情我想确保没有毛刺

want to make sure there's no burrs

coming off of that so that feels pretty

从那里开始，感觉很漂亮那么好，当然你想要的

good right there and of course you want

to make sure there's no filings left

确保没有留下任何文件在这里所以活塞已准备就绪

over here so the piston is all ready to

go but one thing I forgot about are the

去，但我遗忘的一件事是圆柱螺栓，所以我要穿这些

cylinder studs so I'm gonna thread these

things in right now and so since these

现在的事情，因为这些随着时间的推移我很容易抓住铆钉

studs are prone to seizing over time I'm

gonna put some anti-seize here on the

会在这里放一些反抓线程和顺便说一下有两个

threads and by the way there are two

sides of these studs there's a rounded

这些铆钉的两侧有一个圆形面和平底，使圆形的一面

face and a flat base so the rounded side

so how I'm going to tighten down these

所以我将如何收紧这些螺柱是通过使用两个螺母和锁定

studs is by using two nuts and locking

them against each other it's gonna

他们会互相攻击将第一个螺母倒置在上面

thread the first nut on upside-down like

that leaving a good chunk of the threads

这留下了很多线程为顶级坚果暴露，现在我只是

exposed for the top nut and now I'm just

gonna tighten these two nuts against

要收紧这两个坚果彼此，这将允许我

each other and that will allow me to

thread the stud into the case and these

将螺柱拧入表壳和这些螺柱只需要扭到12英尺

studs only need to be torqued to 12 foot

pounds whenever you're working on the

每当你工作时，磅像这样组装的底端

bottom end that's assembled like this

one you want to have a rag covering up

一个你想要抹布的抹布这里的曲轴区域肯定

the crankshaft area here definitely

don't want to be dropping a nut or like

不想放下坚果或类似的东西当我们把活塞钳子放进去的时候

when we're putting the piston pincer

clips in definitely don't want to drop

剪辑绝对不想丢弃像那样的东西

something down there like that

all right let's get this piston

好吧让我们来看看这个活塞最后安装

installed finally

so most Pistons are gonna have an arrow

所以大多数活塞队都会有一支箭就像这一个就在圆顶上

like this one right here on the dome and

that should always be facing towards the

应始终面对排气口或排气口

exhaust port or exhaust side of the

engine so this piston will be installed

发动机所以这个活塞将被安装就像那样

so when looking at the exhaust side of

所以当看着排气侧活塞在这里你会注意到那里

the piston here you'll notice that there

aren't any lubrication or cooling holes

没有任何润滑或冷却孔钻了这个顶点活塞是一个

drilled and so this vertex piston is a

cast piston and those holes are not

铸造活塞和那些孔不是然而，必须在铸造活塞上

necessary on a cast piston however

pistons like a forged Weiss Co will need

像锻造Weiss Co这样的活塞需要那些钻孔和原因

those holes drilled and the reason for

drilling holes on a forged piston and

在锻造活塞和钻孔上钻孔不是铸造的是因为铸造活塞

not a cast one is because cast pistons

and forged pistons expand at different

和锻造活塞在不同的地方扩展这是安装的第一步

rates so the first step in installing

the piston is to install the needle

活塞是安装针头轴承为活塞销，所以我只是

bearing for the piston pin so I'm just

lube it up the inside of the rod here

在这里将它润滑到杆的内部然后我会滑过

and then I'm gonna slide through the

wrist pin bearing you definitely want

你确定要的轴承这个轴承润滑得很好

this bearing lubed up pretty well just

want to give everything a nice coat of

我想给一切都很漂亮润滑剂在它们结合在一起之前

lubricant before it goes together and

like I mentioned earlier this arrow

就像我之前提到过的箭头一样在这里需要指向的地方

right here needs the point towards the

exhaust side of the engine just slide on

发动机的排气侧刚刚滑动活塞就像这样，因为我有

the piston just like so and since I have

the circlip installed on this side of

安装在这一侧的弹性挡圈腕针需要去的活塞

the piston the wrist pin will need to go

through the other side just gotta wiggle

通过另一边只需要摆动活塞周围一点点和

the piston around a little bit and the

pin should slide through there we go and

销钉应该滑过我们去的地方所以最后要做的就是

so the last thing to do here is to

install the other circlip

安装另一个弹性挡圈这里进入活塞所以我再一次

here into the piston so once again I'm

gonna put one end into a cutout here on

将这一端放在一个切口上活塞并尝试使用弹性挡圈

the piston and try to work the circlip

in without scratching the piston there

在没有刮伤活塞的地方我们直接进入凹槽

we go popped right into the groove and

this is more personal preference

这是个人偏好什么，但我喜欢有自己的目的

anything but I like to have the ends of

the circlip lined up with a cutout here

弹簧夹在这里排成一个镂空在活塞那边没有

on the piston that way there's no

possible way that circlip can come out

弹簧夹可以出来的可能方式所以在我滑下圆筒之前

so before I slide on the cylinder got

the gasket to install and the two dowel

要安装的垫圈和两个销钉针脚所以我相信定位销会看到

pins so I believe the dowel pins go see

you look at the bottom the cylinder here

你看这里的圆筒底部他们走在左侧，所以这两个

they go on the left side so on these two

铆钉在这里放一些也不错

and not a bad idea to put some

anti-seize on the dowel pins either and

也可以在销钉上防止卡住像我一样，我喜欢放一层薄薄的

like always I like to put a thin layer

of grease on the gasket surface this

垫圈表面上的油脂只需将垫圈固定到位

just keeps the gasket into place and

then if I have to pull the cylinder off

然后，如果我必须关闭气缸或任何任何原因在路上

or any any reason down the road the

gasket will stay in one piece and it

垫圈将保持整体和它不会撕裂，所以你可以看到油脂

won't tear so you can see that grease

holds the gasket into place pretty good

将垫圈固定到位非常好并防止它四处移动

and prevents it from shifting around

before I get that cylinder on so at this

在我得到那个气缸之前就这样了现在是时候终于滑了

point it is time to finally slide the

cylinder on I am super excited and of

我非常兴奋的气缸当然我把这个活塞滑入之前

course before I slide this piston into

the cylinder doesn't want to have a nice

圆筒不希望有一个好的这里的润滑油涂在裙子上

coat of lube here on the skirts and

inside the cylinder board as well and so

在气缸板内也是如此这将如何工作是我要排队

how this is gonna work is I'm gonna line

up the Rings with the pins as best I can

我尽可能用引脚敲上戒指试着让他们集中在这里

try to get them centered here on the

locating pin and obviously the first

定位销，显然是第一个字符串将进入圆柱体

string is going to go into the cylinder

first so I'm going to compress that just

首先，所以我要压缩它我的手在这里，我的手指，我要去

with my hands here my fingers I'm gonna

try to get the cylinder square on the

试着把圆筒正方形放在上面这里的案例尽我所能来压缩它

cases here do my best to compress that

ring and if you have an extra set of

戒指，如果你有一套额外的如果你有一个伙伴帮忙，请到这里

hands here if you have a buddy to help

you out that helps out with quite a bit

你出去帮助了很多试图让这些戒指进入

trying to get these rings into the

cylinder so ring number one is in and

气缸所以第一号环在和现在第二号戒指会尽我所能

now ring number two gonna do my best

don't line this one up with a pin as

不要用引脚排列这个好看起来相当不错

well looks pretty good slide down the

cylinder a little bit more see if I can

圆筒多一点，看看我能不能得到第二个戒指开始在里面

get that second ring started inside the

bore just a light little wiggle get that

只有一点轻微的摆动得到那个事情开始了，现在在这一点上得到了

thing started and now at this point got

the ring started inside the cylinder

戒指在气缸内开始我会尽我所能保持

just gonna do my best to keep the

cylinder square with the cases and just

圆柱方形与案例和刚刚将那个活塞挤在那里

squeeze that piston down inside of there

just slow and steady gonna get it lined

只是缓慢而稳定地将它排成一排这里有铆钉，一旦我上了

up with the studs here and once I'm on

the studs it should have no problem with

它应该没有问题的螺柱衬里任何东西都会让它滑倒

lining anything got it'll to slip right

down just like that

就像那样看起来很新鲜的男人我喜欢怎么样

man that is looking fresh I love how the

cylinder looks at the cases super happy

圆筒看着案件超级开心结果如何，你们看到了

with how that turned out so you guys saw

how easy it was to slide the cylinder

滑动气缸是多么容易这里有螺柱，所以有新的销钉

onto the studs here so having new dowel

pins here inside these studs helps out

这些螺柱内的销钉有助于解决问题这么多，然后反抓住或

so much and then having anti-seize or

grease on them - that just makes

油脂在他们身上 - 这就是它一切都滑得太快了

everything slide together so much easier

and then down the road so they have to

然后在路上，所以他们必须把这个顶端拉下来重建它

pull this top end off to rebuild it the

cylinder is just gonna slide right off

气缸刚刚滑下来没有任何问题，我不会有任何问题

without any issue like I won't have any

problems with those dowel pins corroding

那些定位销腐蚀的问题或生锈现在我们只需找到我的

or rusting now we just got to locate my

nuts for the cylinder that is and I

圆筒的螺母和我应该把这个东西都拧下来

should have this thing all torque down

now the cellar-door nuts call 429

现在地窖门口的坚果叫429 因此，一旦我将那些扭转成一个

foot-pounds so once I torque those in a

crisscross pattern I've got a little

十字交叉模式我有一点点对你们这个让我们感到惊讶

surprise for you guys so hang tight

so of course next up is gonna be the

所以当然接下来就是了缸头让我告诉你们

cylinder head and let me show you guys

what I'm working with here this thing is

我在这里工作的是这件事所以欺骗它是由Fathead赛车我做的

so trick it is made by Fathead racing I

cannot wait to put it on alright so

我等不及把它放好了这是与这些头脑的交易

here's the deal with these heads the

biggest benefit is that they have

最大的好处是他们有可互换的圆顶

interchangeable domes

which allow you to change the

它允许你改变将自行车的压缩比

compression ratio of the bike which will

obviously change the power so I've got

显然改变了力量，所以我得到了这里有两个不同的圆顶

two different domes here this one is

pretty close to stock compression ratio

非常接近库存压缩比然后这个碰撞比率a

and then this one bumps up the ratio a

little bit so once I have this bike

我有这辆自行车，所以一点点跑步我要测试一下这些

running I'm gonna test out these

different domes and see which one I like

不同的圆顶，看看我喜欢哪一个然后这些也很酷

and then also what's cool about these

heads is they improve cooling so check

头是他们改善冷却所以检查在这里所有这些港口保持你的自行车

out all these ports here keep your bike

cool and on top of all that these things

很酷，最重要的是这些东西只是看着里克迫不及待地想装上它

just looked Rick can't wait to mount it

up so like I mentioned earlier these

就像我之前提到的那样头部是由Fathead赛车和

heads are made by Fathead racing and

what was really cool them to do is they

他们要做的真正酷的是他们向我捐赠了其中一个脑袋

donated one of these heads to me to

raffle off for my cancer recovery fund

为我的癌症康复基金抽奖那么这将如何运作

so how this is gonna work

is they've got a variety of heads over

他们有各种各样的头脑在不同的自行车网站上

there on the website from different bike

sizes different manufacturers and so

尺寸不同的制造商等当你进入头部跑步时

when you enter the running for the head

or for the raffle you're gonna be able

或者你的抽奖活动选择你想要的头，这样你就可以

to choose which head you want so you can

enter or you can buy it as many raffle

输入或者你可以买很多抽奖活动你想要的每张门票都是一张

tickets as you want each one is one

dollar and this raffle is going to end

美元和这个抽奖活动即将结束这个星期六9月15日午夜

this Saturday September 15th at midnight

so get your ticket spot before then and

所以在此之前获取您的票务地点一旦这个视频结束了我想要的东西

as soon as this video ends what I want

you guys to do is head over to that head

你们要做的就是去那个头赛车通讯ph8 e ray辛格康和

racing comm ph8 e ray Singh Kham and

check out what they've got and so while

看看他们有什么，等等我们正在谈论癌症治疗

we're on the subject of cancer treatment

and cancer recovery I figured I'd give

和癌症恢复我想我会给你们有点更新，所以我去过

you guys a little update so I've been

through two chemotherapy treatments so

通过两次化疗治疗他们说我有四个人

far and they say I've got like four to

six more so that's like six more months

六个以上，这就像六个月化疗，只是为了给你

of chemotherapy and just to give you

guys a little idea of how much that

伙计们知道多少钱费用就像一个月十大

costs it's like ten grand a month

for treatment pretty crazy so of course

对于治疗当然很疯狂我正在尝试其他治疗方法

I'm trying alternative treatments doing

whatever I can on my own to get better

无论我能做什么都能让自己变得更好你知道踢癌症屁股得到

you know kick cancers ass and get

through this but it's like a constant

通过这个，但它就像一个常数我每次去的过山车

roller coaster every time I go in for

treatment they knock me back down to

治疗他们把我打倒了零点建立自己回到

ground zero to build myself back up to

like where I'm at right now you know I

就像我现在在哪里，你知道我有足够的能量，我能够工作

have decent energy I'm able to work on

the t-50 a little bit and then when I go

t-50一点点，然后我走了像这样回来治疗

back in for treatment like on this

Monday they're going to just knock me

周一他们会打我完全出来，所以它很漂亮

completely out again and so it's pretty

tough to go through but overall it's

很难通过，但整体而言非常好，所以我很感激你

going pretty good so I appreciate your

guys's support I wouldn't be able to get

伙计们的支持我无法得到通过这个没有你

through this without you

and let's just keep on truckin let's

让我们继续卡车吧踢癌症屁股足够BS

kick cancers ass all right enough BS

let's get this head mounted up on the

让我们把这个头安装在发动机这么胖头提供了一些

engine so fat head supplied some

earrings for the dome in the head so

耳环为圆顶所以当我们将这些到位并安装

when we get these into place and mount

up ahead so this style of head uses

因此这种头部使用方式奥丁而不是传统风格

odin's instead of the traditional style

metal gasket and so I'll be going with

金属垫圈，所以我会去库存压缩比仅为

the stock compression ratio dome just to

limit any issues from the get-go and

从一开始就限制任何问题然后它看起来像Fathead供应新的

then it looks like Fathead supplied new

nuts and washers for the head as well

头部的螺母和垫圈然后对于气缸就好了

and then for the cylinder just gonna

wipe this down with acetone make sure

用丙酮擦拭它确保没有油或装配剩余

there's no oil or assembly left over

this is one gasket surface you don't

这是你没有的一个垫片表面想要有任何油脂或油

want to have any grease or oil on that's

当然哦，还有一件事，我把它

oh and one more thing before I put the

head on I'm gonna make sure the engine

我要确保引擎翻过来没有任何问题

turns over without any issues just

seeing if that piston goes up and down

看看活塞上升和下降在没有抓住任何东西的情况下

in the bore without catching on anything

Oh looks good so we're ready to go and

哦，看起来很好，所以我们准备好了最后那个头上的那个

on goes the head finally sweet that

looks good now it's very important that

现在看起来不错，这非常重要头部螺母被拧得很均匀

the head nuts get torqued in an even

pattern and the torque spec for this

图案和扭矩规格头是20英尺磅，所以起初我是

head is 20 foot-pounds so at first I'm

going to tighten all these the 10 foot

要收紧所有这些10英尺磅，我只是要进去

pounds and I'm just gonna go in a

crisscross pattern here so much like

这里的十字形图案非常像现在，我正在收紧汽车的轮子

tightening a wheel on a car now I'm

going to bump it up to 15 foot-pounds

要把它提高到15英尺磅并遵循相同的模式然后向上

and follow the same pattern and then up

and boom just like that the motor is now

就像电动机现在一样繁荣完成了如此美好的感觉总是一个

finished up such a good feeling always a

good idea to pop in the spark plug just

好主意只是弹出火花塞试图阻止任何进入

trying to keep anything from entering

alright guys that is gonna wrap up the

好吧，伙计们要结束你可以想象cr250发动机法案

cr250 engine bill so as you can imagine

the upcoming videos are gonna be of

即将上映的视频将会是组装自行车，你肯定

assembling the bike and you definitely

do not want to miss out on that so if

不想错过，如果你还没有订阅下去

you're not already subscribed go down

below right now and hit that subscribe

现在在下面点击订阅按钮我只是想非常感谢

button I just want to give a big thank

you to the companies I've been helping

你到我一直在帮助的公司平头赛车提供了头脑

out Flathead racing provided the head

power steel USA did the cylinder repair

动力钢美国做了汽缸维修然后顶点赛车提供了

and then vertex racing provided the

piston so huge shout out to those

活塞如此巨大的喊叫声公司非常感谢你

companies and a big thank you to you

guys for following along with this

跟随这个的人项目

and giving me all the motivation in the

并给了我所有的动力世界上完成这辆自行车哦和

world to finish this bike oh and for

those of you asking about the camp

那些你在询问营地的人他们现在已经有了很棒的帽子

strong hats they are now available over

on primum XCOM with that being said keep

在primum XCOM上，据说保持它是主要人物

Similar videos:

Incredible Two Stroke Engine Build!
Cameron Niemela
3.9M views 30.2K likes 2.3K dislikes 26 Sep 201870% match

Starting My CR250 Build!
Cameron Niemela
978K views 12.9K likes 534 dislikes 01 Oct 201866% match

A Problem With My CR250 Engine Build!
Cameron Niemela
737.2K views 8.9K likes 329 dislikes 01 Jun 201865% match

Problems With My Dirt Bike Project
Cameron Niemela
261K views 6.5K likes 97 dislikes 13 Apr 201963% match

This CR250 Is Going To Rip!
Cameron Niemela
388.2K views 7.3K likes 189 dislikes 22 Mar 201963% match

I Fixed My CR250 Engine For $2!
Cameron Niemela
385.3K views 6.8K likes 147 dislikes 09 Jun 201860% match

Making Progress On My CR250 Project!
Cameron Niemela
265.1K views 6.1K likes 121 dislikes 02 Jan 201960% match

What Caused This CR250 Engine Knock?
Cameron Niemela
293.5K views 3.8K likes 0 dislikes 24 Dec 201758% match

New Parts for my CR250 Build!
Cameron Niemela
407.4K views 7.5K likes 168 dislikes 06 Feb 201956% match

Help Fix My Honda CR250!
Cameron Niemela
455.3K views 7.2K likes 177 dislikes 02 Nov 201855% match

The First Start
Cameron Niemela
363.6K views 6.1K likes 164 dislikes 06 Sep 201948% match

The Best Way To Make An Engine Look Amazing!
Cameron Niemela
693.9K views 10.9K likes 372 dislikes 12 Jun 201847% match

Breaking in the CR250!
Cameron Niemela
803K views 14K likes -1 dislikes 29 Sep 201946% match

Tricks To Cleaning Dirt Bike Engine Cases
Cameron Niemela
586.6K views 7.1K likes 284 dislikes 27 May 201844% match

How Much Did My CR250 Cost?
Cameron Niemela
559.5K views 15.1K likes -1 dislikes 01 Oct 201944% match

CR250 TWO STROKE TEARDOWN!!
Cameron Niemela
392.4K views 4.9K likes 145 dislikes 15 Dec 201743% match

Incredible Rebuild of a $400 Dirt Bike!
Cameron Niemela
6.2M views 142.5K likes -1 dislikes 12 Oct 201943% match

How Well Do Ultrasonic Cleaners Really Work?
Cameron Niemela
596.5K views 4.1K likes 361 dislikes 15 Feb 201838% match

A Lost Cause | RM250 Rebuild 16
Cameron Niemela
45.9K views 2.5K likes 21 dislikes 25 Nov 202036% match

2018-2020 F150 Barricade Pre-Runner Front Bumper with Skid Plate Review & Install
AmericanTrucks Ford
3.4K views 76 likes 5 dislikes 26 Aug 202034% match

Pantalona luxo com muitas dicas de costura [molde disponível]
Vanessa Oliveira
16.1K views 1.4K likes 11 dislikes 19 Oct 202034% match

How to Buy a Used Car for $300 (Runs and Drives)
ChrisFix
11.1M views 224.3K likes 5.6K dislikes 21 Mar 201833% match

2015-2017 Mustang GT MMD GTX Steering Wheel; Leather and Suede Review & Install
AmericanMuscle Mustang
4.6K views 98 likes 3 dislikes 03 Mar 202133% match

New Jurassic World Super Colossal Tyrannosaurus Rex Unboxing T-Rex Fallen Kingdom Mattel Vs Hasbro
Amazing Dinosaurs
7.5M views 26.2K likes 7K dislikes 15 Mar 201832% match

Can Cerakote Be Done At Home?
Cameron Niemela
1.5M views 17.4K likes 855 dislikes 03 Apr 201832% match

Artillery Sidewinder X1 v4 3D Printer Review
Makers Mashup
14.4K views 208 likes 42 dislikes 16 Jan 202132% match

Suéter de Buho - Talla 4 a 5 años (PARTE 2 de 2)
Tejiendo con Midori
24.8K views 924 likes 14 dislikes 01 Oct 202032% match

No Creerás lo que Puedes Hacer con Una Lata y Un Frasco de Cristal
Yobanka Art
1.6M views 40.9K likes -1 dislikes 18 Oct 201932% match

An Update.
Cameron Niemela
42.5K views 3.1K likes 30 dislikes 30 Oct 202032% match

Pull&Scaldacollo Puma (1°parte : Pull)
uncinettando con Elsa
8.6K views 462 likes 9 dislikes 01 Nov 202031% match

Settings Privacy About Contact Donate